Page 54 - Merrick Tackle Catalog

54 MERRICK TACKLE Order Toll Free: 800-628-8904 / 24/7 Toll Free Fax: 800-686-7763
Hardware
MODEL FA - GA
GRAPHITE ARBORS
Made of polyurethane, our GRAPHITE ARBORS are lighter than cork, •
but unlike cork or tape bushings, are much harder. They give the rod
maximum sensitivity by transmitting the strike signal and lure action
from the blank through the reel seat, to the fisherman’s hands. Porous
surface enhances glue bonding.
GA arbors include glue channels on the outside surfaces and are less •
likely to become loose between the blank and reel seat after continuous
use.
Standard I.D. can be reamed to fit a wide array of blank diameters. •
Length: FA = 5.75” (146 mm), GA = 1” (25.4 mm) •
Made of durable black graphite/nylon compound •
- up to 75% lighter than brass gimbals.
Ribbed inside for firmer bonding. Can be used •
with our detachable butt caps.
ITEM NO. LENGTH I.D. O.D. DEPTH USE WITH
BUTT CAP mm inch mm inch mm inch mm inch
GG21B 45.0 1.77 20.6 0.81 24.0 0.95 34.9 1.38 BCM22
GG23B 57.0 2.24 22.5 0.89 26.7 1.05 41.3 1.63 BCL24
GG28B 71.7 2.82 27.5 1.08 30.7 1.21 56.9 2.24 BCL28
GG21B
GG23B
GG28B
GG28B
BCL28B
GRAPHITE GIMBALS
Gimbals, Arbors & Plugs
ALUMINUM GIMBALS
Solid aluminum up to 50% lighter than brass gimbals. •
Anodized to prevent corrosion. •
Curved vertical slot for improved leverage in rod belts with •
vertical pin. Scored inside for better adhesion to blank.
Rounded bottom for use with fighting belts not including •
gimbal pins.
Fits snugly into butt caps BCL26 or BCL28. •
Color LENGTH I.D. O.D. DEPTH USE WITH
BUTT CAP Gold Silver TiCH Green Deep Red Blue Black mm inch mm inch mm in mm in
AG24-G AG24-S AG24-C AG24-GR AG24-DR AG24-U AG24-B 57.0 2.25 23.8 0.94 26.8 1.06 34.9 1.38 BCL26
AG27-G AG27-S AG27-C AG27-GR AG27-DR AG27-U AG27-B 64.0 2.50 27.2 1.07 31.5 1.24 41.3 1.63 BCL28
AG24-C
O.D. I.D.
ITEM NO. mm inch mm inch FOR PACBAY REEL SEATS
FA12 GA12 11.0 0.43 6.35 0.25 A4, A5, AR6, AR6R, AR8
FA14 GA14 14.0 0.55 6.35 0.25 GR17, A7
FA16 GA16 15.3 0.60 6.35 0.25 G16, G16C, GTF16, GW17, GW18, A6, A8, A16
FA18 GA18 17.0 0.67 6.35 0.25 G17, G17C, GTF17
FA18L GA18L 17.0 0.67 6.35 0.25 G18, G18C, GTF18, G20M
FA20 GA20 19.3 0.76 6.35 0.25 G20, G20C, G22M, G24M, A20
FA22 GA22 21.0 0.83 6.35 0.25 G22, G22C, AH22M
FA24 GA24 23.0 0.91 6.35 0.25 G24, G24C, AH24M, G26M
FA26 GA26 25.3 1.00 6.35 0.25 G26, G26C, AH26M
FA28 GA28 28.0 1.10 6.35 0.25 G28
FA30 GA30 29.5 1.16 6.35 0.25 G30
FA18
FA22
FA30
GA30 GA22 GA18
ITEM NO.
O.D.
FIT REEL SEATS
mm inch
BP16-B 15.7 0.62 A5, A6, A8, G16, A16
BP18A-B 17.5 0.69 G17, A18
BP16-B BP18A-B
Made of durable rubber/vinyl compound. •
Fits the butt end of reel seat to protect and cushion the rod. •
BUTT PLUGS
ROD BUILDING • PAC-BAY GIMBALS, ARBORS, PLUGS