Page 36 - Merrick Tackle Catalog

36 MERRICK TACKLE Order Toll Free: 800-628-8904 / 24/7 Toll Free Fax: 800-686-7763
ROD BUILDING • ACCESSORIES ZAP, U-40
FOAM SAFE SYSTEM
FOAM SAFE CA
Ideal for polystyrene, foam board, cellfoam, XPS and EPS foam. Outstanding
foam to foam and wood to foam adhesion. Can also be used on wood, carbon
fiber, ceramics and many other materials. Odorless formula.
No. Size
FTEPT25 20 grams
FOAM SAFE KICKER
Accelerator for Foam Safe CA
No. Size
FTEPT28 2 oz.
Z-POXY QUICK SHOT
Handy 5-minute epoxy bonds wood, metal, plastic, fiberglass,
glass, ceramic, leather…you name it! Great for on-the-sport
field repairs.
No. Size
FTEPT36 1 oz. package
SLO-ZAP CA
Thick and strong for high stress areas. Works well on hard
woods such as Maple and oak, also will bond glass, metals
(non-stress) and ceramics. Allows 30 seconds for positioning
and cures in 60 seconds.
No. Size
FTEPT33 2 oz.
PLASTI-ZAP
Medium viscosity for plastics. Cures clear. Won’t attack paint.
Great on most plastic models, car moldings, and vinyl repairs.
No. Size
FTEPT19 1/3 oz.
ZAP GEL
All-purpose adhesive and sealant. Thickest ZAP of all. Great
where gaps are too wide for thinner ZAPs. Comes in both 3-
gram (1/10 oz.) and 20 gram (7/10 oz.) tubes.
No. Size
FTEPT27 3 grams
FTEPT26 20 grams
Z-42 THREAD LOCKERS
Prevents threaded hardware loosening from vibration.
The blue is temporary, the red is permanent. These are
the best thread lockers you can buy! For use up to 1/4-
20 threaded hardware. Use on roller guides and reel
seats.
No. Size
FTEPT42 Temporary
FTEPT71 Permanent
THE ONLY TOTAL ADHESIVE SYSTEM
Zap products are used for all aspects of
fly tying, rod building and lure making.
ZAP A GAP CA+
Gap filling formula.7-10 seconds for positioning. 20 seconds cure time.
Bonds to anything Works on oily surfaces too. Excellent skirt glue
No. Size
FTEPT02 1 ounce
FTEPT04 1⁄ 4 once
ZAP CA
Super thin penetrating formula. Works great on most materials.
Strengthens fiberglass cloth. Bonds in1-5 seconds. Great knot glue
No. Size
FTEPT10 1⁄ 4 ounce
ZAP A DAP A GOO
All-purpose adhesive and sealant. Not a super glue. Bonds virtually
anything to anything. Gooey, strong, yet flexible formula.
No. Size
FTEPT12 1 ounce
Z-7 DEBONDER
Debonding agent for all super glues. Softens
cured glue so it can be easily removed.
No. Size
FTEPT16 1 ounce
KICKER FOR PLASTICS
The only accelerator safe to use on plastics. Use sparingly. Expands gap-
filling ability.
No. Size
FTEPT15 2 ounce
Z-ENDS
Extender tips. Allow smaller drops of glue to be placed in hard-to-reach
areas. Ten tips & a 12" length of micro dropper tubing.
No.
FTEPT18
Z-POXY
* Great for epoxy flies, and rod building
No. Type Size
FTEPT37* 5 min. 4 oz
FTEPT38* 5 min. 8 oz
FTEPT39 30min. 8 oz
QUIK-BOND
Quik-Bond has the same features and benefits you have
come to know and love about Rod Bond, such as:
• Easy to mix, very forgiving
• Stays where you put it without dripping and running
• Note: These top two features make rod-building classes much easier
• Bonds almost any material to any material, i.e. cork, metal, wood,
graphite, fiberglass, EVA, etc.
• Can be used for bonding cork rings, cork handles, EVA foam handles,
reel seats, butt caps, ferrules, winding checks, hosels, rod tips, etc. Feel
free to use your imagination.
• Can be molded, drilled, and, tapped, colored, etc.
• Has a knack for being a rod builder’s dependable friend.
• Begins setting up in about 15 minutes at 70° F and about 10 minutes at
90° F. In less than one hour bonded parts can be handled freely. This
saves you time when you need it without sacrificing any “Rod Bond”
benefits.
No. Size
U4072 2oz.
U4074 4 oz.
U4078 8 oz.