Page 29 - Merrick Tackle Catalog
Basic HTML Version
MERRICK TACKLE
29
/
SPEED WRAPPER
Originally designed for commercial rod manufacturers, this smooth
operating set up provides almost effortless wrapping. Cushioned nylon
rollers on a polished steel shaft allow free spinning action with great
control. A wrapping control board with adjustable thread tension and
thread feed slides along a 7' alignment board.
No.
SW1
FINISHING MOTORS
For commercial rod makers who need a
smooth running, high speed finishing
machine. Full length steady hand rest, free
spinning roller supports and self-adjusting
chuck for effortless application of finish.
No.
Speed
GM18
18 RPM
GM6
6 RPM
GM40
40 RPM
CORDLESS
High quality, quiet 7 RPM motor with self adjusting chuck for rotating a
rod while applying a curing Flex Coat Rod Finish. Comes with a stable
vinyl coated stand and a v-upright support for any rod length. Thousands
of hours of operation on one 6 volt battery included.
No.
Speed
BR7
7 RPM
CORK LATHE SET-UP
Set-up includes motor stand with motor clamps and 2 sets of roller
supports. Adapts to almost any hand drill. Sturdy, commercial duty. This
lathe is fantastic for shaping cork and foam grips.
No.
RL100
PROFESSIONAL OEM POWER DRYING UNIT
Holds four rods, wall mounted, suitable for tackle shop repair
operations or stackable for mass production OEM purposes.
Continuous duty 6RPM or 18 RPM motor standard. On-off lights
and switches.
No. Speed
GM4X18
18RPM
GM4X6
6RPM
Drill not in-
cluded.
POWER FINISHING MACHINE
Designed for commercial rod manufacturers who need a
smooth running, high speed finishing machine. The full
length steady hand rest, free spinning roller supports and self-
adjusting chuck allow effortless application of finish. Quality
USA built motor. Assembly required.
No.
Speed
FM200
200 RPM
DECORATIVE WRAP LAYOUT JIG
This tool makes the most complicated decorative butt wraps easy to
layout. The package includes a circle template for marking the axis of
the rod blank, a 12 inch long C-Thru ruler for precise measurements,
and a precision cut “V” groove in the layout jig for lengthwise rod
marking. A perfect accessory to the “Flex Coat Step By Step
Decorative Rod Wrapping” books.
No.
DW2
BENCHES, FINISH MACHINE
WRAPPING MACHINERY •
ROD BUILDING
ELECTRIFICATION KIT
Note: Build your own rod bench.
Our kit is a great gift for a new custom rod builder! Rod wrapping machines
are an expensive investment for a novice, but with this kit you get the
benefits of a power wrapper without the cost. Includes foot pedal, motor,
rheostat, all wiring and one adapter to hold rod. Completely assembled.
No.
MT01
PARTS LIST
No.
Description
MT03
Foot pedal &wiring
MT04
Metal Motor adapter
MT05*
Rod holding caps
1
⁄
2
"
,
5
⁄
8
"
,
3
⁄
4
"
,
7
⁄
8
"
, 1
1
⁄
8
"
, 1
1
⁄
4
" (*Be sure to specify size)
MT06
Motor only
