414
MERRICK TACKLE
Order Toll Free: 800-628-8904 / 24/7 Toll Free Fax 800-686-7763
RODS •
LAMIGLAS
3
ROD MATERIALS
3M™ POWERLUX™ COMPOSITES
Used in Lamiglas Si, Bug Slinger, Infinity Bass and Infinity Fly, 3M™ Powerlux™ Composites feature
a revolutionary technology that contains nano-sized spheres of silica so small, they are able to
flow between individual filaments of carbon fiber, creating a matrix of strength throughout the
entire composite. The resulting material enables designers to develop rods that are not only
incredibly strong and durable, but also lighter in weight and more sensitive.
XMG 50 GRAPHITE THE NEWEST “SUPER” GRAPHITE.
This super graphite allows us to make smaller-diameter blanks with faster actions. The XMG 50
utilizes a blend of high-modulus graphite fibers to create a perfectly balanced, lightweight blank
that is more responsive and more sensitive than anything on the market today.
CERTIFIED PRO GRAPHITE REMARKABLY LIGHTER AND STRONGER.
The Certified Pro series employ an all-new smaller-diameter blank design with an improved resin
system to produce a 15 percent lighter-weight rod than comparable graphites on the market.
G1000 GRAPHITE A LAMIGLAS EXCLUSIVE.
This is our most distinguished and versatile material. We employ first generation graphite coupled
with a special resin formula to reduce overall weight while maintaining exceptional flexibility.
FIBERGLASS E-GLASS EARNED ITS PLACE IN HISTORY.
This material is structurally the most durable of the fiberglass family. The glass properties are
expressly matched to each unique application. We use the same epoxy resins and technology in
these rods as we do in our graphite rods to offer you lighter weight and improved sensitivity.
TRI-FLEX EXCLUSIVE GRAPHITE/FIBERGLASS CONSTRUCTION.
A graphite base and fiberglass overwrap is reinforced with graphite through the butt and mid
sections. You get the best of both worlds. We refer to this as “tri-wall” construction. The tips
are lightning fast and softer so they cast live bait as well as throw heavy iron, while the graphite
reinforced portion of the rod gives tremendous fish-fighting control and lifting power.
ACTION. WE MAKE IT HAPPEN.
“Action” is the measurement of deflection or flex the rod exhibits under load, and more impor-
tantly, where that flex occurs along the length of the blank. “Extra Fast” actions concentrate more
of the flex towards the tip. “Slow” actions distribute the flex progressively throughout the entire
blank. Lamiglas rod actions are dictated by a variety of factors: the intended application, targeted
prey, lure weight and line weight.
POWER. HOW MUCH DO YOU NEED?
Applicable to our salmon, steelhead, saltwater and bass rods, “power” is defined by the amount
of pressure required to flex the blank. These rods are designed to optimally manage a specific
range of lure and line weights. The heavier the line and lure, the more power you’ll need to cast,
fight and pull effectively. The lighter the line and lure, the less power you’ll need.
WEIGHT. LOSE AS MUCH AS POSSIBLE.
A rod that feels heavier each time you cast eventually slows you down. The type and amount
of material used contributes greatest to this factor. Lamiglas selects the lightest material and
components for the job, but we resist the temptation to go “too light.” We design rods that will
cast for a lifetime, without ever leaving your arms lifeless.
TAPER. HERE’S THE SKINNY.
The measurement of the change in the diameter of the blank from tip to butt is known as taper.
Many use the term synonymously with “action.” But actually, taper is one of the factors which rod
builders use to achieve the desired action. An aggressive taper at the tip creates a faster action.
A straight taper (one which changes at an equal rate throughout the blank) creates a moderate
or slower action.
PROLONG THE LIFE AND PERFORMANCE
OF YOUR LAMIGLAS ROD.
Lamiglas fishing rods are built with the finest materials available and constructed to exacting
standards. Our expectations of every rod are as high as those anglers who fish with them. With
some common sense and careful handling, your Lamiglas rod will offer a lifetime of exceptional
experiences.
LINE RATINGS
The individual characteristics built into each and every Lamiglas rod highlight the rods intended
use. As a part of that, the strength and flex of the blank is balanced to the recommended line
ratings. A Lamiglas rod is rated so that when the rod is held at a 45-degree angle or less, line
within the rating will break before the rod does. Angles greater than 45-degrees transfer undue
stress to the tip section of the rod (practically eliminating the ability of the stronger butt section to
carry any load), and in extreme cases can result in rod failure with as little as 2 pounds of directed
pressure. It is not only proper use that requires a rod angle of 45-degrees or less, but this is also
the area where you’ll find the greatest power from the rod and best control over the fish.
LURE RATINGS
Lure ratings provide a range of lure weights in which optimum performance is achieved. Using
a lure that is lighter than the listed weight will not properly load the rod, casting distance and
sensitivity will suffer. Using a lure that is heavier than the listed weight will overpower the rod.
Again, distance and sensitivity will suffer, along with the compounded problem of overstressing
the blank fibers.
REEL INSTALLATION AND REMOVAL
Prior to reel installation, lubricate the reel foot and the threads of the reel seat. Insert the reel
and tighten the lock-nut finger tight. Shake the reel side-to-side and tighten again. Repeat the
process until the reel no longer moves. Graphite reel seats should never be over-tightened and
pliers should never be used in the process. Over extended periods, the reel seat hood may seize
to the reel foot. Slowly loosen the reel nut. If it starts to seize, tap the hood. This will break loose
the deposits that have built up over time. Continue to loosen the nut. If you do not tap the hood
loose, you may separate the hood from the nut.
TRANSPORTATION
The key to rod transportation is eliminating sharp impact to the blank. The best place for a rod to
travel is inside a protective tube. If not carried in a tube, the rods should not be left to bounce
against other rods or terminal rigging (weights, heavy swivels, lures, etc.) At vehicle travel speed,
sharp impacts from these items can fracture the rod blanks. The best way to transport multi-piece
rods is with rubber bands holding the sections together. Always affix the sections tip-to-tip and
butt-to-butt. This keeps the delicate tip from being crushed against the uneven and much larger
handle. Also, do not use hair bands with a metal connecting clip on rods as the metal clip can
scratch, or worse, fracture the blank.
STORAGE
Store rods in either the vertical or horizontal position. If leaned in a corner, a set or bow in the
rod can occur over time. Never leave your rods where critters can get to them. Scents, salt from
perspiration and other biologic contaminates are a sure-fire attraction to undesirables.
CLEANING THE ROD BLANK
The best cleaner we have found for cleaning the blank and handle is a mixture of one part isopro-
pyl alcohol and four parts warm water, along with a good dose of liquid dish soap. Using a soft
sponge, scrub the blank and handle, then rinse. Dabbing problem areas with the soap mix for a
few minutes before scrubbing can soften heavy build-up. Once you have the rod clean, a coat of
wax will simplify the maintenance of a beautiful finish. We recommend any of the carnuba based
car waxes. Fish scales and many types of bait will not stick to a waxed rod and it makes cleaning
a snap. If you are fishing everyday, a coat of wax every other week should suffice.
CLEANING GUIDES AND REEL SEATS
As strange as it may sound, the use of a toothbrush and toothpaste will remove the stubborn
deposits on rod guides and reel seats. After cleaning the reel seats, coat with any light oil. This
method works on all reel seats.
MATERIALS/PERFORMANCE
Lamiglas
0...,404,405,406,407,408,409,410,411,412,413 415,416,417,418,419,420,421,422,423,424,...518