Page 370 - Merrick Tackle Catalog

370 MERRICK TACKLE Order Toll Free: 800-628-8904 / 24/7 Toll Free Fax 800-686-7763
TITANIUM PLIERS
CP900Ti / CP850EXTi / CP950Ti
The CP900Ti is constructed with lightweight
military grade titanium providing a lifetime of
rust-free operation. The nonslip Sanoprene®
rubber grips are molded integrally with the
handle for “sure nonslip” gripping in wet
environments. The CP900Ti also features
diamond ground “dual vee” tungsten carbide
line cutters for easy cutting of new technology
fiber line, stainless wire up to 180 lbs., and
monofilaments. Jaws are channel cut at a 20°
diamond pattern for secure holding power. The
Pivot bearing is machined from solid brass and
are electroless nickel plated to provide non-
seizure operation. Approximate weight 6.5 oz.
The CP850EXTi is constructed with
lightweight military grade titanium providing a
lifetime of rust-free operation. The nonslip
Sanoprene® rubber grips are molded integrally
with the handle for “sure nonslip” gripping in
wet environments. The CP850EXTi also features
diamond ground “dual vee” tungsten-carbide
line cutters for easy cutting of new technology
fiber line, stainless wire up to 180 lbs., and monofilaments. The Pivot
bearing is machined from solid brass and are electroless nickel plated to
provide nonseizure operation. Approximate weight 3 oz.
CP950Ti pliers are a prime example of quality and durability. The
CP950Ti is constructed with lightweight military grade titanium providing
a lifetime of rust-free operation. The nonslip Sanoprene® rubber grips are
molded integrally with the handle for “sure nonslip” gripping in wet
environments. The CP950Ti also features a unique line cutter design that
cuts wire up to and including #19. This product cuts stranded wire and
new technology braided line cleanly without leaving frayed or distorted
ends. Jaws are channel cut at a 20° diamond pattern for secure holding
power. The Pivot bearing is machined from solid brass and is electroless
nickel plated for non-seizure operation. Approximate weight 6.5 oz.
No.
DONCP900TI
DONCP850EXTI
HOOK SHARPENER
Handles a wide variety of hook shapes and sizes. Restores a sharp point
in a matter of seconds. Palm sized, fits flat in shirt
pockets or pants. Easy lanyard attachment.
No.
DONCP100
KNIFE SHARPENER
A lightweight, securely built, two-stage sharpener that’s an
excellent choice to hone pocket knives or thin blade fillet
knives. Tungsten-Carbide cutters shape and align the knife
edge. Arkansas stone provides secondary finishing for a
razor sharp edge.
No.
DONCP500
FISHERMAN’S KNIFE/HOOK SHARPENER
This versatile knife and hook sharpener produces professional results yet
weighs only about 1 oz. It fits comfortably in
pants or jacket pocket. Tungsten-Carbide cutters
shape and align the knife edge. Integral hook
sharpener gives new life to dull hooks.
No.
DONCP501
STAINLESS PLIERS
CP850 / CP850EX
The CP850 is constructed from 17-4 Stainless
Steel with non-slip rubber grips molded
integral with the handle. Replaceable line
cutters consist of anvil and cutter, both
constructed of tungsten carbide and diamond
ground for sharpness. Sleeve bearing is machined from solid brass and is
electroless nickel plated to give years of corrosion protection with non-
seizure operation. The jaws are alloyed with hard carbide for an excellent
grip without damaging the hook. Has the capability of cutting new
technology fiber braided lines, up to 450lb. monofilament, as well as
180lb. stainless line. In addition the CP850EX has channel grooves
machined into the jaws and an internally mounted return spring.
Approximate weight is 5 oz.
No. Length
DONCP850 63⁄8"
DONCP850EX 63⁄8"
No. Length Weight
DONCP880 71⁄4" 8 oz.
CP950 / CP900
The CP950 is constructed from 17-4 Stainless
Steel with nonslip rubber grips molded integral
with the handle. Jaws are channel-cut at a 20°
diamond pattern for secure holding power. Pivot
bearing is machined from solid brass and are
electroless nickel plated to provide a lifetime of non-seizure operation. The
unique line cutter design cuts solid wire up to #19. In addition, they cut
stranded wire and new technology braided line cleanly without leaving
frayed or distorted ends. Approximate weight 10.5 oz.
The CP900 is constructed from 17-4 Stainless Steel with nonslip rubber
grips molded integral with the handle. Jaws are channel-cut at a 20°
diamond pattern for secure holding power. Pivot bearing is machined from
solid brass and electroless nickel plated to provide a lifetime of non-seizure
operation. Approximate weight 10.5 oz.
No. Length
DONCP900 7 3⁄8"
DONCP950 7 3⁄8"
COILED TETHER
101⁄2 " coiled tether with stainless steel marine snaps
and split ring will extend over 5' to ensure that our
pliers are always within easy reach.
No.
DONCP9050
HOLSTERS
Each holster is artfully crafted, treated leather used in military and law
enforcement applications, where outdoor wear and durability is required
for holsters, belts, cases, etc. The leather is custom formed to retain the
plier in the holster, yet allows easy plier removal when
required. Each holster is fully stitched to outperform and
outlast other leather sheaths in water, scuff, stain, and stretch
resistance. Holsters may be worn with or without a belt. This
holster is made specifically for the CP900/950 series plier.
No.
DONCP9520 LEATHER PLIER HOLSTER
Fits 900 Series
DONCP8020 CORDURA PLIER HOLSTER
Fits 850 Series
Donnmar Donnmar
CP900Ti
CP850EXTi
CP950Ti
CP9520
No.
DONCP950TI
DONCP880TI
HOOK-OUT FORCEPS
Easy retrieval and removal of
hooks and other material.
No.
TOL00023
12" FORCEPS
Serrated tips.
No.
TOL00248
TACKLE • TOOLS & ACCESSORIES DONNMAR PLIERS, HOOK AND KNIFE SHARPENER