Page 342 - Merrick Tackle Catalog

342 MERRICK TACKLE Order Toll Free: 800-628-8904 / 24/7 Toll Free Fax 800-686-7763
DELUXE MASTER VISE
A deluxe heavy duty vise in “Black No Glare” and
Brass finish.
• Heavy duty jaws will hold firmly Streamers and
Salmon hooks as well as small dry hooks.
• The jaws can be rotated to inspect the underside of
the fly without releasing the hook.
• The angle of the jaws can be adjusted to suit the
requirement of the individual fly tyer.
• The vise comes with a deluxe table clamp.
No.
8101
SUPER II VISE
A very popular vise for the discriminate
fly tyer with a “Black No Glare” finish.
No.
8103
SUPER AA VISE
The top selling model among all our vises.
• Hardened jaws will hold wide range of hooks.
• Single lever action allows quick change of hooks.
• Grooved stem to enable vise to turn for viewing the
far end of the fly.
• Each vise packed with adjustment instructions and
material spring.
No.
8109
SUPER AA
BLACK VISE
Similar to 8109 but
in “Black No Glare” finish.
No.
8110
SUPER A VISE
Hardened jaws.
• Lever action.
No.
8127
FLEX COAT
EPOXY FLY & JIG TURNER
The use of 5-Minute epoxy and high build finish for making fly bodies,
coating lures and jigs, and suspending iridescent crystals is a rapidly
expanding practice in luremaking. The key to success with this technique
is rotating the lures while they cure. The Flex Coat Epoxy Fly and Jig
turner is equipped with a USA built, continuous duty 18 RPM motor and a handy on/off switch. Lures are
securely held in place by inserting hook points into durable EVA foam. This system also includes a
V-upright support, which enables it to double as a rod finishing motor.
No. Description
ET18 3 Disk
HT6 1 Disk
LV Lure & jig holder
FLY KING VISE
An inexpensive vise for the beginner.
• Made of chrome plated high quality steel.
• Operated by wing bolts.
• Good for tying hook size 8-14.
• Recommended for beginners, fly tying classes and kits.
No.
8114
SILVERADO VISE
Hardened steel jaws.
• X-large C-clamp
• Extra jaw.
• Stem extender.
• Easy to change jaws.
No.
8175
ROTATING SPRING ACTION VISE
Spring action hardened steel jaws will hold hooks
very firmly.
• Specially hardened steel jaws.
• The angle of the jaws can be adjusted.
• The hardened jaws will hold hooks firmly.
• Deluxe brass and no glare black finish.
• Extra wide table clamp.
No.
8173
ROTARY VISE
• Body and knurled knob made of special
stainless steel.
• Jaws made of hardened steel.
• Jaws can be rotated to inspect the underside
of the fly without releasing the hook.
• Dual wing bolt system for tightening the hook.
• Special deluxe table clamp.
• The vise comes with the bobbin stand.
No.
8191
8114
ET18
FLEX COAT PIN CLIP
This tool is used for holding a fly while
applying epoxy. Pinpoint securely
sticks into the foam while rotating the
fly until epoxy dries. Pack of 6 pieces.
No.
PC6
PRACTICAL FLY
PATTERNS THAT
CATCH TROUT DVD
with
Charlie Meck &
Eric Stroup
Volumes One
& Two
No.
TIG1
TACKLE • FLY TYING TOOLS VISES, SUNRISE, JIG TURNER